Text only | Text with Images

Lil' Blackbox

Coding => v1.0 - v1.1 => Topic started by: Deviance on September 15, 2015, 07:41:57 AM

Title: GTB2260 via CAN
Post by: Deviance on September 15, 2015, 07:41:57 AM
Hello Guys.

Please can you help me in code or how works CAN L and H?
I made 722.6 controller for my Mercedes W124 and om606.
old video: https://www.youtube.com/watch?v=0uLhYjP5jjo

I have gtb2260 turbo and actuator on it. I seen it's works via CAN H and L.
https://www.youtube.com/watch?v=ldrTvE2uDww

So please can you guys help me?

Thank You!
Title: Re: GTB2260 via CAN
Post by: hakcenter on September 15, 2015, 07:04:36 PM
I thought the vnts were pm not can bus.
Title: Re: GTB2260 via CAN
Post by: Deviance on September 17, 2015, 12:41:49 PM
Many works with pwm and many with canbus.
Title: Re: GTB2260 via CAN
Post by: hakcenter on September 17, 2015, 08:02:50 PM
Well first you're going to need to pirate the canbus and figure out the command sequence.

So you'll need a vehicle this thing comes stock on, and figure out its address, and what to send it to do what.
Title: Re: GTB2260 via CAN
Post by: Deviance on September 20, 2015, 10:21:33 AM
Thank You!
Text only | Text with Images