Lil' Blackbox

Coding => v2.0 => Topic started by: Clarkwisely on June 15, 2017, 07:24:11 PM

Title: Need some help with my he351
Post by: Clarkwisely on June 15, 2017, 07:24:11 PM
Hello I have a 97 12v with the stand alone controller, wondering if someone could help me code, I have 120 hp injectors and 3.55 gears with 35s, I can't get my exhaust break to really hold or whistle  and can't get the turbo to light till like 2300rpms, any help will be greatly appreciated
Title: Re: Need some help with my he351
Post by: hakcenter on June 17, 2017, 07:57:58 AM
Do you have the android app and syncd to the LBB ?

If you get no response from the brake pin, you may have the CAN BUS wires reversed
Title: Re: Need some help with my he351
Post by: Rx7man on June 17, 2017, 01:40:16 PM
It sounds like the turbo is wide open, which happens when there's a communication fault (2300 is about when it spools if I have mine wide open too)  As hakcenter said, check the CAN bus wiring over, and power supply.

Oh, and welcome :)
Title: Re: Need some help with my he351
Post by: Clarkwisely on June 17, 2017, 05:14:25 PM
It's not stuck wide open because if I flip the break on  and take off I can light it  fast and  then flip it off and were good if tryed sealing the wires
Title: Re: Need some help with my he351
Post by: Rx7man on June 17, 2017, 09:21:36 PM
I'm not familiar with the official LilBB code (I run my own), but I think you ought to be able to open the serial monitor and see what it's doing
Title: Re: Need some help with my he351
Post by: hakcenter on June 20, 2017, 11:07:11 PM
Clark join the semi closed beta for the Android App here : https://play.google.com/apps/testing/com.devnull.lbb from your Android device.

Connect to the LBB with pin code 9220, and let us know if it sync's up with any data. To me it kinda sounds like you may just need to adjust the curves if the brake is indeed working.
Title: Re: Need some help with my he351
Post by: Clarkwisely on August 24, 2017, 01:22:27 PM
Should the break work in the performance  position
This what I'm getting
Title: Re: Need some help with my he351
Post by: hakcenter on August 24, 2017, 07:20:05 PM
Yes if you look into the calculate modes section, brake is if'd last, so

if perf is on, or cruise is on but brake is on, brake will be the thing really done.


What are you looking to do ?

PS Position looks to be super way off.......
Title: Re: Need some help with my he351
Post by: Clarkwisely on August 24, 2017, 07:35:16 PM
Ya turbo hasn't acted right since day one, don't spool very fast and exhaust break dose almost nothing  zero break effect
Title: Re: Need some help with my he351
Post by: hakcenter on August 24, 2017, 08:50:33 PM
Try using my personal code.. Seems like an issue with the type of value used for position.

Also what version of Arduino IDE are you using ? May want to update to at least 1.8.2
Title: Re: Need some help with my he351
Post by: Clarkwisely on August 25, 2017, 03:26:28 AM
I have your stand a lone system
Title: Re: Need some help with my he351
Post by: hakcenter on August 26, 2017, 11:44:20 PM
I do believe this is resolved :D
Title: Re: Need some help with my he351
Post by: Rx7man on August 28, 2017, 12:55:50 AM
Good news :)