Author Topic: Turbo RPM curve  (Read 79 times)

Offline Jakekloss

  • Member
  • **
  • Posts: 2
    • 2004 dodge 3500
on: September 19, 2018, 04:50:11 AM
I just purchased the 1.1 box and still waiting for it to come in, my question is what curb setting is best for towing witch one will give boost a lower RPM?



Offline hakcenter

  • developer
  • Hero Member
  • *****
  • Posts: 723
    • 1998 12v Ram
Reply #1 on: September 19, 2018, 11:07:44 AM
It's all very relative.

You'll definitely want to make your own curve as you tow and figure out what works best for your load and motor.

AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.



Offline Jakekloss

  • Member
  • **
  • Posts: 2
    • 2004 dodge 3500
Reply #2 on: September 20, 2018, 07:51:01 AM
Thank you for the response this is all new to me! Is the install pretty simple? I order the one that’s fully assembled



Offline Rx7man

  • Crazy guy
  • Hero Member
  • *****
  • Posts: 1014
  • Jack of all trades
    • '94 Dodge dually
Reply #3 on: September 22, 2018, 04:39:59 PM
yeah, nothing too hard about it... hardest part is getting the turbo to physically fit, downpipe, etc

'94 dodge, Colt Cam, head worked, NV5600, 3.55's, SB clutch, Ford manual hubs w. hawk brakes, custom flatdeck, custom aluminum bumper, cab off restoration, totally new engine, Mahle pistons @19:1..HE351VE with 67mm turbine and 67x95mm compressor
440hp/1000 ft lb @ 2400 RPM