What it's all about

Started by Bradshaw106, September 03, 2016, 05:12:34 PM

Bradshaw106

im considering doing this swap on my ve powered 2ndgen.  I'm very interested in how the code works.   I have experience coding the arduino, but it has been about a year!! So I'm dusting the cobwebs off.   Figured I would just say hi and let you know I'm going to be trolling around a bit ;)

hakcenter

TS2009 Deḇarim 8:2
"And you shall remember that יהוה your Elohim led you all the way these forty years in the wilderness, to humble you, prove you, to know what is in your heart, whether you guard His commands or not.

Bradshaw106

Truck is a 2000 engines a 1990
Drove a 1st gen for many years, but need the quad cab because of kids.   So I bought a gasser and dropped a motor in

hakcenter

TS2009 Deḇarim 8:2
"And you shall remember that יהוה your Elohim led you all the way these forty years in the wilderness, to humble you, prove you, to know what is in your heart, whether you guard His commands or not.

Rx7man

Welcome!
I don't have much experience with the VE pumps (dad has a '92)

The 'official' Lilbb code is pretty plug and play and doesn't require a whole lot of sensors...

Me being me, I wanted to be able to say "I did it myself" and wrote my own from the ground up and have honestly not looked at the official code in a year or so.. Mine does what I need and I'm really happy with it (still tuning though, as always)... I run a pretty complete set of sensors (4 thermocouples(optional), boost(required) and exhaust pressure (recommended), TPS(required), turbine(recommended) and engine (required) RPM)... I'm somewhere around 1000 lines of code, and I run the Mega 2560 because of memory and IO's (yes, I'm using most of them)
'94 dually,  67/67 HE351VE, NV5600, ~600hp
'93 ECLB 47RH, new toy truck, H pump project, 1000hp goal, 300K miles
93 XCLB auto, bone stock, 350K miles
93 XCLB 5spd, bone stock, 100K miles