12v TPS for non-auto

  • 1 Replies

Offline hakcenter

  • developer
  • Hero Member
  • *****
  • 642
    • 1998 12v Ram
12v TPS for non-auto
« on: September 01, 2016, 02:03:17 PM »
Well, this has been a super journey.

I've been looking for a TPS mount for my truck forever. I have a later year 12v, so it is 96-98. Low and behold different years, different TPS bracketing even though everything else is the same.

The later years, use a mopar #4882856 / cummins #3931556, for a 2 piece bracket to hold the tps in place with mopar #04883979AA / cummins #3929866

Earlier years only used 1 part, Cummins #3925380

Now to find a TPS :)

Video of the backet installed on a later year 12v


Offline Rx7man

  • Crazy guy
  • Hero Member
  • *****
  • 918
  • Jack of all trades
    • '94 Dodge dually
Re: 12v TPS for non-auto
« Reply #1 on: September 02, 2016, 12:17:53 AM »
I made my own with a round spacer and a piece of thin plate... also had to weld a bigger tab on the shaft for it to work reliably
'94 dodge, Colt Cam, head worked, NV5600, 3.55's, SB clutch, Ford manual hubs w. hawk brakes, custom flatdeck, custom aluminum bumper, cab off restoration, totally new engine, Mahle pistons @19:1..HE351VE with 67mm turbine and 67x95mm compressor
440hp/1000 ft lb @ 2400 RPM