Let's talk turbo...

Started by Bradshaw106, September 04, 2016, 07:22:06 PM

hakcenter

Pretty sure most are created equal, at least the ones off Cummins :)

As long as you run my code or me785's you won't blow up a controller. The original arduino code that was produced wasn't fully thought out, and updated the controller way too often. One unit blew upers.
TS2009 Deḇarim 8:2
"And you shall remember that יהוה your Elohim led you all the way these forty years in the wilderness, to humble you, prove you, to know what is in your heart, whether you guard His commands or not.

Bradshaw106

I have scrounged up some money, so I'm on the hunt for a turbo.  Just wasn't sure if their was problem areas.   Sounds like their pretty solid

Rx7man

I don't know of any differences that would cause incompatibilities.. On mine it seems the wire colors were different, but pinout was the same.. Mine seems to have a longer 'timeout' when comms drop (80ms) than others (10ms or less I think?)  I think if you wire things right, put a fuse in it, they're pretty robust... Some people don't use the water jacket, but I think especially on a tow rig or long duty machine it's essential.. it's a little more plumbing but once it's in it's there.
'94 dually,  67/67 HE351VE, NV5600, ~600hp
'93 ECLB 47RH, new toy truck, H pump project, 1000hp goal, 300K miles
93 XCLB auto, bone stock, 350K miles
93 XCLB 5spd, bone stock, 100K miles

65fpvmustang

We think the ford turbo's canbus speed is different.