Author Topic: 12v TPS for non-auto  (Read 909 times)

Offline hakcenter

  • developer
  • Hero Member
  • *****
  • Posts: 770
    • 1998 12v Ram
on: September 01, 2016, 02:03:17 PM
Well, this has been a super journey.

I've been looking for a TPS mount for my truck forever. I have a later year 12v, so it is 96-98. Low and behold different years, different TPS bracketing even though everything else is the same.

The later years, use a mopar #4882856 / cummins #3931556, for a 2 piece bracket to hold the tps in place with mopar #04883979AA / cummins #3929866

Earlier years only used 1 part, Cummins #3925380

Now to find a TPS :)

Video of the backet installed on a later year 12v

AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.



Offline Rx7man

  • Crazy guy
  • Hero Member
  • *****
  • Posts: 1079
  • Jack of all trades
    • got 4 cummins
Reply #1 on: September 02, 2016, 12:17:53 AM
I made my own with a round spacer and a piece of thin plate... also had to weld a bigger tab on the shaft for it to work reliably

'94 dually,  67/67 HE351VE, NV5600, ~600hp
'93 ECLB 47RH, new toy truck, H pump project, 1000hp goal, 300K miles
93 XCLB auto, bone stock, 350K miles
93 XCLB 5spd, bone stock, 100K miles