Recent Posts

11
v2.0 / Re: Looking to buy but have a few questions
« Last post by Thatwhitecummins on April 16, 2021, 03:39:44 PM »
I dont know emough to be fully commited. What does the stand alone need to tap  into for power? Does it tap into the pcm at all?
12
v2.0 / Re: Libb 2.0 availability
« Last post by Dooley on April 12, 2021, 02:19:34 PM »
Hakcenter, sent you a message
13
v2.0 / Re: Libb 2.0 availability
« Last post by hakcenter on April 11, 2021, 10:47:30 PM »
I only have 1 left collecting dust on my desk, if you're interested let me know.

I could do another run of 10 if more people show interest.
14
v2.0 / Re: Looking to buy but have a few questions
« Last post by hakcenter on April 11, 2021, 10:46:29 PM »
I have one collecting dust on my desk if you're interested ?
15
v2.0 / Libb 2.0 availability
« Last post by Dooley on April 11, 2021, 12:58:37 PM »
I was looking to order one of these but found that there not available at this time. Any updates on that?
My banshee seems to have taken a crap, and won’t control the actuator, I found that out by buying a new actuator and it still doesn’t function. I think years ago when I decided to go banshee instead of Lbb, I made a mistake, but I was just intimidated by the coding aspect. That seems to be addressed now Thanks to you and others.
Anyways I have a show to drive my 5yr restoration project to in 4 days (67 International crew cab Cummins swap)and no controller for the HE351.......Thanks
16
v2.0 / Re: Looking to buy but have a few questions
« Last post by Thatwhitecummins on April 10, 2021, 03:45:13 PM »
Is there a full stand alone controller in stock? I have a vgt on my truck but controlled with a spring. I tried to buy a full stand alone vgt controller but it wasn’t in stock. I assumed they weren’t being made anymore
17
v2.0 / Re: Looking to buy but have a few questions
« Last post by hakcenter on March 23, 2021, 08:00:19 AM »
There’s plenty of options to do your own coolant flow through the cartridge.

Personally I ran mine without coolant for over 8 years 🤷‍♂️
18
v2.0 / Looking to buy but have a few questions
« Last post by Thatwhitecummins on March 11, 2021, 05:53:43 PM »
I’m interested in this but have a few questions. How would i get coolant to go through the turbo to keep the actuator cool? Or just run it without cooling the actuator?
19
v1.0 - v1.1 / Re: My life, My coding
« Last post by Rx7man on February 28, 2021, 09:10:28 PM »
baby season around here again!
20
v1.0 - v1.1 / Re: My life, My coding
« Last post by Rx7man on February 19, 2021, 01:45:00 PM »
Well, I finally got the biggest part of my H pump build in my hands... Now for the brainiac parts!

I got some Shied Diesel stainless  .120" P pump 24V injector lines, some Mahle 24V pistons, and the icing on the cake, I'm going to try the chinesium head studs... I got two sets, they seem alright by looking at them, and for $100/set delivered.. I'll give them a shot.. gotta be better than stock head bolts.

I got some datasheets for the H pump, and from my reading it's capable of 350 bar injection pressure, so I might not have to go with monster (expensive) 24V nozzles...

I do still have to find an atmospheric turbo I like, I'd like an S480 with a single scroll housing.. still debating if I want to do a HE351VE or the 351CW... would be nice to have engine brake.

On the transmission side, for now I have a single disc billet stock stall converter and a mild build 47RH... but I'm trading an old NV4500 for a 47RE that has a billet input with like 40K miles, it lost 2nd gear, so I'm thinking it broke the band strut... I'll steal the billet input from it.

Otherwise, it's calving time here again, got 3 bouncing baby boys